Ayudha Pooja was organized on 22-10-202 under the cultural committee. The celebrations of the Ayudha pooja was carried out in grand manner. Lot of Cultural events were organized which showcased the rich cultural heritage of the region. The procession of Goddess Sri Durgaparameshwari started at 11.00.A.M from the college Main entrance accompanied with Chende, Nashik Band, Pili Gobbu, Mahishamardhini Dance. The Pooja started at 1.00.P.M and prasada was distributed to all the members present.

8 mini project batches have exhibited their mini project models in MINI PROJECT EXHIBITION-2022 organized by our department professional society. 31 students were participated in this event. Event Organized by Mr. Ajith G Joshi, Assistant Professor, Dept of Mechanical Engineering. Mr. Sandeep S, Assistant Professor, Dept of Mechanical Engineering. Mr. Prashantha M V, Assistant Professor, Dept of Mechanical Engineering.

Farewell to the final students was organized by pre final year students. Students of pre final year performed cultural activities and hosted gaming events. Mementos were distributed to the senior students. HOD Dr.Venkatesh shared some of the memories with the students and cheered the gathering. Final year students were given an opportunity to share their experiences during the four years of their engineering life. Various subject handling faculties and the students TG's shared their memories. The program concluded with the Lunch.

14 project batches have exhibited their academic project models in EXPO-2022 organized by our department in association with ACME and IIPC. Nearly 75 students of high school and PU colleges visited along with their staff in and around Benjanapadavu and also the students of 1st, 2nd and pre-final year students visited the Expo, seen the different kind of projects and understood new engineering concepts. Details of Prize Winners: 1st Place: Batch No: 2 Title of the Project: Development of Areca Leaf Cup Batch Members: 4CB18ME027-Rajesh Lobo 4CB18ME040-Sukesh 4CB18ME045-Vinyas Rao 4CB18ME048-Yashodhara Project Guide: Mr. Narayana Swamy, Assistant Professor. 2nd Place: Batch No: 1 Title of the Project: Design and Development of Meduvada Making Machine Batch Members: 4CB18ME010-Harshith 4CB18ME017-Lokesh 4CB18ME042-Umesh 4CB18ME044-Vinith Raj Project Guide: Mr. Naveen A Kalal, Assistant Professor.

The project titled "Development of filaments for 3D printing and other applications, from recycled PET bottles and other plastic waste" is funded by the Department of Science and Technology (DST), Govt. of India, New Delhi. Ref: DST/TDT/WMT/Plastic Waste/2021/06 (G). Total fund allotted by DST is Rs.30,41,764 with a capital component of Rs. 11,00,000/- and General component of Rs. 19,41,764/- for a period of Three years. Dr. B. Krishna Prabhu, Prof. ME is the Principal Investigator with Dr. Vasanth Kumar, Mr. Vinod Kumar M and Mr. Srinivas Shenoy, Asst. Prof. ME, are Co-Principal Investigators.

The Program was organised by the department of mechanical Engineering for final year students. Eleven students from final year attended t he training and got the knowledge of software testing. the training module included, SDLC models, levels and types of testing, testing techniques, and agile methodologies.

He was graduated in mechanical engineering in the year of 2021. At present he is working as a faculty in GTTC Bangalore. He had interacted with pre-final year mechanical students and discussed about Skills India competition. He was won the gold medal in national level skill India completion which was held at Delhi and selected for the international level.

He was graduated in Mechanical Engineer in the year of 2017. He was working as a design engineer in DGSTS Bangalore. He had interacted with pre-final students and discussed about role of design engineer, software knowledge, training requirement etc.

He was graduated in mechanical Engineering in the year of 2016. Presently working in JSW Railways as a Production Engineer. He was discussed about job opportunities in core companies and pre-requisites for the same.

The third semester students were welcomed to the branch by the senior students. Cultural programs by various year students were conducted. Each section was given fifteen minutes to perform variety programs. The students who participated in various department activities and did innovative things were appreciated by the HOD and HOD requested the seniors to guide the new comers so that they can excel in their academics.

Aydha pooja was organized on 13th October 2021. The celebration of Ayudha Pooja is pride of Department of Mechanical Engineering. The procession of goddesses Sri Kateel Durgaparameshwari started at 10.30am from the college entrance with Chende, Nashik band,Pili Gobbu, Mahishamardhini Dance. The Pooja started at 1.00 in the machine shop and prasda distributed to the gathering.

This event was organized to help the faculties to understand the various aspects of Industry 4.0. In this the role of engineering in automation and digitalization was very well explained. Skills and training required to develop as automation engineer was discussed. Later brief scope of setting of labs under center of excellence (COE) on Factory automation, Process automation using PLC, HMI and SCADA training kits. Later faculties appreciated the event.

The Department of Mechanical Engineering organised an ATAL Academy sponsored One Week Online Faculty Development Programme (FDP) on "Advancements and Entrepreneurial Opportunities in Additive Manufacturing". The FDP lectures were delivered by faculty members and industry experts from reputed academic institutions/organisations and industries. The FDP focused on Metal Additive manufacturing, Bio printing, 3D Printing techniques and its benefits. The program also included elaborated in depth lectures with high level of experience from industry with practice and demo sessions using latest simulation software. About 100 Participants from various institution participated in this programme, certificates were also issued for them. The FDP provided an opportunity for participants to know about the strategy for developing as an entrepreneurial in 3D printing field.

Department of Mechanical Engineering conducted the technical talk for the betterment of students under "An initiative to adapt Industry 4.0in academics". Topic that discussed under the technical talk was "Job Opportunities in Oil and Gas Industries".

webinar was to arranged for the students about Job opportunities in system application & products (SAP) in data processing. Resource persons explained about the openings in SAP modules that fit to mechanical engineering and to get into the SAP field. SAP is considered to be one of the booming area and data processing system in more than 100 countries. They explained the process involved in recruiting process.

Event is arranged in Google Meet plat form, to take the Suggestions to frame new program.

This FDP is mainly organized to make faculty understand the basics of coding language and coding and give Hands on experience to the technical staff members of department. Total of 9 participants actively participated in this FDP. What is coding, why python is needed? , and related industrial application was explained.

An interaction of two companies that our students had started is organised on 2nd November 2020 in Mangalore. Objective being to build a nexus between two and grow by mutual cooperation. Company 1. Stella Designs. By Sumanth Shenoy (E&C) and Suhas Kamath (Mech.). They are into 3D printing, component manufacturing.Recently they also had a website launch Company 2. Meta Studios by Vignesh Kamath (Mech), Jeevan Kamath (Mech, 7th SEM). They are into Digital marketing, E-commerce, Social media ads etc. They are looking for someone who helps in Java script coding at back end. one of our student Raghavendra (7th SEM), who joined their company on 2nd November 2020 . He will look after modelling and other allied facilitates available in Mechanical softwares, for both the companies and may start his own company later.

The Webinar highlighted the need of Parametric deign for mechanical engineers. he talked about how tools like Excel can be integrated with design software like catia, solidworks, Creo. the webinar also helped students to understand the need of upgrading the knowledge with a new perspective.

This event was organized to help the students to understand the various aspects of Industry 3.0. In this the role of mechanical engineering in automation was very well explained. In particular skills and training required to develops as automation engineer was discussed. Later job prospects for PLC based projects and how to develop projects was also explained. later faculties and students appreciated the event.

Mr. Akshay Kamath is an alumnus of 2019 batch currently working in Total Oil and Gas, Bengaluru. This event was organized to help the present final year students to understand the various aspects of oil and gas industries and how to prepare for the interviews of the same. Akshay gave a brief talk about his company and what are its prospects and what are the skills that fresh graduates need in order to get a job in core industries. This alumni talk was appreciated by one and all.

Explained the following in detail 1. Why GD&T is required? 2. What is the role of GD&T in Manufacturing sector? 3. Basics of GD&T characteristics 4. How to measure GD&T characteristics? 5. Excercise on GD&T problems.

Explained the following in detail. 1. Why GD&T required? 2. What is the role of GD&T in Manufacturing sector? 3. Basics of GD&T Characteristics 4. How to evaluate GD&T characteristics 5. Hands on GD&T problem.

Webinar Series on an Initiatve to adapt Industry 4.0 in academics organised by Department of Mechanical Engineering. Under Chapter-2 of webinar series "Placement Opportunities in Mechanical Industries" by Mr.Vishwanath Bhat, Engineer, Strategic Sourcing, Automotive Axles Ltd, Mysore on 27.9.2020. All Students and Faculties have participated in the webinar.

Mr. Vishwanath Bhat is an alumnus of 2019 batch currently working in Automotive Axles Pvt Ltd, Mysuru. This event was organized to help the present final year students to understand the various aspects of core mechanical industries and how to prepare for the interviews of the same. Vishwanath gave a brief talk about his company and what are its prospects and what are the skills that fresh graduates need in order to get a job in core industries. This alumni talk was appreciated by one and all.

Webinar Series on an Initiatve to adapt Industry 4.0 in academics organised by Department of Mechanical Engineering. Under Chapter-1 of webinar series "An introduction to Industrial Internet of Things (IIOT)" by Mr. Somasundaram N Managing Director, Finixel Technologies Pvt Ltd, Bengaluru on 19.9.2020. Formal Function is inugurated by Mr. Vinayak kamath, CEO Auto CNC, Bengaluru and presided by Mr. M Padmanabh Pai,Correspondant, CEC . All Students and Faculties have participated in the webinar.

Mr. Vinay explained what industry is looking from an fresh engineer graduate, what are the skills need to develop by students. How industries will work. if student wants to work in design field which are the certification opportunities available to enhance their skills.

This FDP is mainly organized to make faculty understand the basics of PLC and AUTOMATION and give Hands on experience to the faculty members of CEC. Faculty as well as technical staff also joined in this FDP. Total of 25 participants actively participated in this FDP.PLC was explained. What is PLC, why automation is needed? , and related industrial application was explained. PLC in industries and its application was discussed.

This FDP is mainly organized to make faculty understand the basics of Python and give Hands on experience to the faculty members of CEC and other colleges across the globe. Faculty as well as industrialists, not only from India, from abroad also joined in this FDP. Total of 147 participants actively participated in this FDP.

He was graduated in the year of 2019 from mechanical Engineering. Currently working in mechanical core branch. In his company they are manufacturing components/spare parts for the an automobile industry. He was discussed about manufacturing procedure,safety points to be followed in an industry. He also discussed about importance of technical knowledge, aptitude and soft skills to face interview with HR.

He was graduated in the year of 2018 from Mechanical Engineering. He was explained about responsibility of front line manager in a manufacturing sector. He also discussed about job opportunities in manufacturing concerns as a design and manufacturing engineer.

A three days workshop was organized for the students of final year Mechanical Engineering to enhance the written communication skills and use of Micro Soft Office in 1. Preparing the documents/reports using Microsoft word. 2. Preparing tables, plotting various types of Graphs/Charts using Microsoft Excel 3. Preparing power slides, design slides, create animations for point presentations. The students learnt to prepare Seminar reports/project reports. prepare charts, tables graphs required for their project reports prepare Presentations for their project seminars

CAD Modelling event was conducted on the second day of aakriti. 8 students participated in the event. The event was held in two rounds namely 2D drafting round for 45 minutes and 3D modelling round for 2 hours. Both first as well as second place were bagged by final year mechanical students of canara engineering college.

He was graduated in mechanical engineering in the year of 2017. Presently working in abroad as a inspection engineer. He had explained about importance of doing some certification courses after graduation to get job opportunities in chemical industries. He did courses like NDT-1,NDT-2, Certified welding Inspection(CWI), American Welding Society(AWS), American Petroleum Institute (API570-Piping Inspector)and API510 Pressure vessel inspector. He also explained an availability of courses in India and its scope in India and abroad.

A four day technical training on Auto Cad was arranged for 43 students of 4th semester. The basic tools of 2D drafting and simple sketches on the same were delivered.

The training on Microsoft office aimed at giving basic of Microsoft Office. They were taught MS WORD, MS EXCEL with hands on sessions. students learnt about how to insert copy, paste, modify, delete, draw table, flow chart, formating etc Students learned many useful features of these two which are very useful for them at present as well as in future.Students showed keen interest to learn these things.

He was graduated in mechanical engineering in the year of 2016,presently working in Auto CNC. he had interacted with third year mechanical students and explained about their company profile,various products they are manufacturing. He has provided information related product design,process design, tolerance, certification of standards. He was also discussed about various components exported to different countries and terms and conditions followed to reach customer satisfaction.

He was graduated in the year of 2018 in mechanical engineering. Presently working in Auto CNC machining limited as a quality engineer. He had interacted with third year mechanical students and explained about product design,process design, tolerance, certification of standards. He discussed about importance of technical knowledge and aptitude to face interview.

He was interacted with second year mechanical students and explained about their company profile,various products they are manufacturing. He has provided information related product design,process design, tolerance, certification of standards. He was also discussed about various components exported to different countries and terms and conditions followed to reach customer satisfaction.

He was interacted with second year mechanical students and explained about their company profile,various products they are manufacturing. He also delivered information related product design,process design, tolerance, certification of standards. He discussed about importance of final year project,internship , product patent and product process approval process(PPAP).

The objective of the Training was to reduce the gap between industry and academia; hence the training was concentrated more with hands on training. A part drawing was given to the students and they were asked to produce the part by their own by adapting the technique or process that is followed in a production industry. This helped the students to get real time work experience and knowledge in producing a part. Understanding a drawing, planning the sequence of machining operation and the inspection of part before and after the production process was taught. At the end of training students machining their own models using CNC machines and check for the quality.

In a Skill development program on MS office, students were apprised about various tools of MS word and Excel. tools like Justify, font editing, paragraph editing, page layout, creation and editing of table, titles and sub titles, inserting and editing of various shapes and arts, using formula bar in excel, creating graphs and charts, etc. students were given exercises to practice the discussed options. The program will continue as a part of the regular time table in coming weeks.

PLC was explained. What is PLC, why automation is needed? , and related industrial application was explained. PLC in industries and its application was discussed. • Architecture of PLC • I/O Modules • Input and Output Devices • Logical Functions, Relays and field of application. • Examples of relay logics Hands work on CODESYS workbench was demonstrated in the lab. It included Ladder Logic diagram and simulation. • Structure of Program • Procedure for creating ladder logic • Logical Functions done by ladder program in software. • Examples.

Explained the following in detail 1. Why GD&T is required? 2. What is the Role of GD&T in Manufacturing sector? 3. Fundamentals of GD&T characteristics 4. How to measure the GD&T characteristics 5. Exercise on GD&T problems.

Explained the following in detail 1. Why GD&T is required? 2. What is the Role of GD&T in Manufacturing sector? 3. Fundamentals of GD&T characteristics 4. How to measure the GD&T characteristics 5. Exercise on GD&T problems.

The workshop is aiming to introduce the students to Robo Soccer. The workshop involved building of the bot in the first session and Robo Soccer competition in the second session. Students are introduced to mechanical bot making in the first part of morning session by providing all the components required in the form of a kit. in the second part the controlling of the bot is taught. it involves introduction to DPDT keys and all other electrical parts. In the afternoon session, students underwent a soccer game and competition. Winners are honored.

3 days training on solid works organised by the department of mechanical engineering for 6 th semester A section students from 10.2.2020

A six days hands on training was conducted for the 2nd semester students. 29 students actively participated in the training. An introduction to Autodesk AutoCAD was given, following which the basic tools used in AutoCAD were discussed. Machine components, company brand logos and some other drawings were provided to the students as exercise problems to understand the basic usage of AutoCAD tools. All Students keenly participated in the training. On the last day of the training, 3D drafting was dealt with where students were given problems on Isometric projections. The training concluded on a positive note and all the students took maximum benefit of of it.

The following concepts taught in the workshop 1. Industrial application of software and creation of simple 3D objects using basic tools 2. Using part modeling how to create 3D objects 3. Using surface platform how to create shell objects 4. Using an assembly platform how to do part assembly 5. How to create 2D drafting and how to prepare the 2D objects for GD & T 6. How to create 3D models using surface rotation method

The following concepts taught in the workshop 1. Industrial application of software and creation of simple 3D objects using basic tools 2. Using part modeling how to create 3D objects 3. Using surface platform how to create shell objects 4. Using an assembly platform how to do part assembly 5. How to create 2D drafting and how to prepare the 2D objects for GD & T 6. How to create 3D models using surface rotation method

The training programme aimed at giving basic of Microsoft Office. They were taught MS WORD, MS EXCEL and MS POWER POINT with hands on sessions. Students learned many useful features of these three which are very useful for them at present as well as in future.Students showed keen interest to learn these things.

The following concepts taught in the workshop 1. Industrial application of software and creation of simple 3D objects using basic tools 2. Using part modeling how to create 3D objects 3. Using surface platform how to create shell objects 4. Using an assembly platform how to do part assembly 5. How to create 2D drafting and how to prepare the 2D objects for GD & T 6. How to create 3D models using surface rotation method

Students from Sharada PU College mangalore Visited CEC Campus on 27th December 2019. The glimpse of activities conducted by Mechanical Department faculties. In Morning session thought applications of PLC in Advance manufacturing, modelling by using solidedge software and 3D Printing. In the afternoon session they were taken to Machine shop lab, and explained and had hands on about CNC turning and Milling operations. Students enjoyed their visit to CEC

Dr. N Satheesh Kumar, Associate Professor, Mr Naveen A Kalal, Assistant Professor, Department of Mechanical Engineering participated in the Event. The objective of the workshop is to impart a knowledge of latest BMW engines.A complete dis- mantle and assembly of a engine was carried out.The resource persons shared their experiences in the field of automotive transmission. And latest updates in automotive sector was made aware.Few faculties from neighboring institution also participated in training program. It was a total hands of training program

1) Portable Circular Saw Cutting Machine. 2)Quick Return Mechanism by Crank and Slotted Link. 3)Perpetual Motion Mechanism. 4)Design of Hydraulic Ladder. 5)Design of Scissor Lift. 6)Design of Hand made Gyroscope. 7)Gear Based Quick Return Mechanism. 8)Design of Pantograph Cutting Tool. 9)Design of Cylindrical Grinding Machine. 10)Mini Conveyor using Geneva Mechanism. 11)Design of Robotic Arm. 12)Design of Motorized Hydraulic Jack. 13)Design of Rotary Engine Mechanism. 14)Design of Manually Operated Bending Machine. 15)Design of Pedal Operated Ramming Machine. 16)Design of Table Saw.

Fifty students from second year mechanical engineering department,participated in Swachatha Andolan organised by Ulaibettu Grama Panchayath. Our Principal Dr. Ganesh V Bhat was the chief guest and faculty Mr. Shreenath coordinated the activity. This activity was conducted as a part of social outreach programme.The mentors of this SOP team are: Mr. Shreenath,Mr. Prashanth Kamath,Mr. Niranjan Rai, Mr. Vasanth Kumar and Mr. Srinivas Shenoy.

to create awareness in civilians about cleanliness programme was conducted

An expert talk event was conducted on 19.11.2019 on Tribology and wear effects for 7th semester A section students as part of Outcome based Education. An exam was also conducted at the end to evaluate students involvement.

An expert talk event was conducted on 19.11.2019 on Microstructure and heat treatment for 3rd semester students as part of Outcome based Education. An exam was also conducted at the end to evaluate students involvement. In the talk, introduction to SEM images and microstructural changes of duplex stainless steel due to heat treatment was also given.

An expert talk event was conducted on 19.11.2019 on Tribology and Wear of DSS for 7th semester B sec. students as part of Outcome based Education. An exam was also conducted at the end to evaluate students involvement. In the talk, introduction to SEM images and sliding wear behaviour of duplex stainless steel was also given. Limelight was given on further scope for study.

The workshop is aiming to introduce the students to Robo Soccer. The workshop involved building of the bot in the first session and Robo Soccer competition in the second session. Students are introduced to mechanical bot making in the first part of morning session by providing all the components required in the form of a kit. in the second part the controlling of the bot is taught. it involves introduction to DPDT keys and all other electrical parts. In the afternoon session, students underwent a soccer game and competition. Winners are honored.

Mr. Sunil explained about basics of Bernoulli's pr and their principle with example and its application. He focused on Hydraulic turbine design and installment in various water sources. He highlighted on problem faced and limitations of various designs.Session was very interesting and interactive.

The workshop is aiming to introduce High school and PUC students to Robo Soccer. The workshop involved building of the bot in the first session and Robo Soccer competition in the second session. Students are introduced to mechanical bot making in the first part of morning session by providing all the components required in the form of a kit. in the second part the controlling of the bot is taught. it involves introduction to DPDT keys and all other electrical parts. In the afternoon session, students underwent a soccer game and competition. Winners are honored.

A workshop on Virtual Labs is conducted under National Mission on Education Through ICT, a MHRD Govt of India Initiative by NITK Surathkal nodal center on 6th November 2019. Over 100 students and mechanical staff members participated and shown interest in adopting concept.Many experiments were conducted on different Mechanical Laboratories like Strength of Materials, Vibration lab,Fluid Mechanics lab etc.

1) Household kitchen waste management , converting it to manure 2) management of E-waste and recycling of old electronics 3) current cleanness condition of our city and actions undertaken to improve it

The workshop is aiming to introduce High school and PUC students to Robo Soccer. The workshop involved building of the bot in the first session and Robo Soccer competition in the second session. Students are introduced to mechanical bot making in the first part of morning session by providing all the components required in the form of a kit. in the second part the controlling of the bot is taught. it involves introduction to DPDT keys and all other electrical parts. In the afternoon session, students underwent a soccer game and competition. Winners are honored.

The workshop is aiming to introduce High school and PUC students to Robo Soccer. The workshop involved building of the bot in the first session and Robo Soccer competition in the second session. Students are introduced to mechanical bot making in the first part of morning session by providing all the components required in the form of a kit. in the second part the controlling of the bot is taught. it involves introduction to DPDT keys and all other electrical parts. In the afternoon session, students underwent a soccer game and competition. Winners are honored.

The welcoming of third semester students to the branch is a tradition in practice from so many years by the senior students, along with this a cultural competition among the various year students was organized. each section was given fifteen minutes to perform variety programs and Vth B section students won the competition and awarded with the cash prize. The students who participated actively during NBA visit and did innovative things were appreciated by the HOD with a token of love.

The celebration of Ayudha Pooja is pride of Department of Mechanical Engineering. The procession of goddesses Sri Kateel Durgaparameshwari started at 10.30am from the college entrance with Chende, Nasik ,Pili Gobbu and Dasara Bombe. The Pooja started at 12.30 in the machine shop and prasda distributed to the gathering.

He was graduated from our mechanical department in the year of 2019,interacted with third year mechanical students. He has provided information about gaps in academic and industry and preparations needed to fill this gap.

Department of mechanical engineering organised one day in-house symposium on 7.9.19. The students of 3rd and 5th semester mechanical Engg. Participated in this event. Student’s participation was well appreciated.

The objective of the workshop is to impart a basic knowledge of Dynamics of Machines and Machine Design, where main focus on experimentation on machines. A One day hands on laboratory session was organized so that participants are exposed to testing of machines. All the experiments related to curriculum and industries were dealt with during the hands on session. The workshop was held in Design Labrotary

The workshop was concentrated to provide hands on experience on autonomous system that are very important in industrial automation. In the workshop students programmed HCSR05 ultrasound sensor and measure the distance of object from thew censor.also they are trained to used newping library for US sensor. The participant are also trained on the science and engineering behind DHT11 Moisture and temperature Sensor, Interface with Arduino and necessary programs for working with the same. In the second half training on relay circuits, Interfacing with Arduino and controlling it with using IDE was executed.

GTTC is an autonomous society, and a recognized Scientific and Research Organisation by the Government of India. Govt. Tool Room and Training Centre (GTTC), is serving industry by way of precision tooling and providing in well trained craftsmen the area of tool and die making. Today, the GTTC have acquired mastery in mould and die making technology and have blossomed into an epitome of precision and quality in the development and manufacture of sophisticated moulds, dies and tools. Fully aware of the rapid advancement in technology the world over, the GTTC is periodically adding new technologies to the existing set of advanced equipment like CAD / CAM, CNC machines for tooling, Precision Components, Laser for Industries, Rapid prototyping, vacuum casting etc.

student have been enhanced with knowledge of 1. Introduction and need of study of thermal stations 2. terminology involved in power plant 3. Layout and essential need of any thermal station 4. coordination with the crew members,ethical values in power stations 5. latest development in flue gas treatment 6. how CEC'ians to apply and approach for job in present scenario

Solid works is a one of the booming software in the mechanical industry developed by Dassault system. Modelling of machine components is major activity usually decided by the design stage itself. Dimensions of the machine model once approved in design department will go to the shop floor for fabrication. Hence knowledge of modelling software is very much essential for the mechanical students. The modelling software skill will be enhanced with the training. The trainer is a certified from the software company and trained the students as per the requirements.

The workshop was concentrated to provide hands on experience on autonomous system that are very important in industrial automation. In the workshop students programmed HCSR05 ultrasound sensor and measure the distance of object from thew censor.also they are trained to used newping library for US sensor. The participant are also trained on the science and engineering behind DHT11 Moisture and temperature Sensor, Interface with Arduino and necessary programs for working with the same. In the second half training on relay circuits, Interfacing with Arduino and controlling it with using IDE was executed.

Ms Agnila Jain third year Mechanical student did MC, Ms Pallavi Pai third year Mechanical student began the program with prayer, Mr Wilson second year student read life history of Mr.Sarvepalli Radhakrishnan. Dr Krishna Prabhu,addressed the gathering and shared his experience as teacher and student when he was studying.

The objective of the talk is to impart a knowledge of Industrial Automation.The use of various sensors in automation was also made to understand. The application of automation in various fields were discussed with students.The talk was addressed to final year students.The resource shared his experiences in industries and offered students to undergo workshops or internship in automation.

The workshop is aiming to introduce High school and PUC students to Robo Soccer. The workshop involved building of the bot in the first session and Robo Soccer competition in the second session. Students are introduced to mechanical bot making in the first part of morning session by providing all the components required in the form of a kit. in the second part the controlling of the bot is taught. it involves introduction to DPDT keys and all other electrical parts. In the afternoon session, students underwent a soccer game and competition. Winners are honored.

Students got an opportunity to interact with an industry veteran in design and Research. Mr. Hande V described about the evolution of Industry 4.0 and the need for smart manufacturing technology. He emphasized on understanding and gaining knowledge in latest technologies like Additive manufacturing,IoT and Cyber physical system.The session was interactive and students enjoyed it.

ABHAY ENGINEERS MANUFACTURER & EXPORTER OF CASHEW PROCESSING MACHINERIES Agriculture, Farm Machines & Tools Kamath's Industrial Estate, Hoige Bazaar,, MANGALORE Ajith Enterprises INDUSTRIAL ESTATE BAIKAMPADY Ajith Enterprises have fully fledged machine shop, fabrication yard, also they can undertake all kinds of fabrication works such as cylindrical storage tanks, Steel canopies, Pre Engineered structures, manufacture and supply of industrial spares like Flanges, gears, pulleys, bushes shafts, nonferrous bearings ,bushes, typical bolts and nuts, custom built equipments etc

Adressed the final year students regarding scope and challenges for student projects in small scale industries. He also adressed about the needy of social responsibility for the engineers. he enlighten the students about finding the solution for small problems which will afects the social with high impact.

This workshop mainly concentrated on imparting knowledge and first hand experience with working with 3D Printers. 3D Printing technology is considered as the next emerging field and it becomes necessary to explore the leaps and bounds of this technology. With this regard, Machenn innovations had provided this workshop so that students could work with 3D Printers and gain knowledge about this technology for which 2 printers were used. Students were given multiple projects and they had to come up with ideas and design the models to be printed on the printers which the students have successfully completed. One printer is also permanently installed in the department so that in the coming future, industry projects could be done by the students as a part of their internship. An MOU was signed between Machenn innovations and Canara Engineering College for further collaboration.

Discussed about gap in Academic and industry What and how basic concepts of mechanical(specially thermal)engineering to be made strong What is that basically required in the beginning of someones carrier How to be entrepreneur in present scenario

On account of Akshay Urja Divas 2019, Mr. Ajith Kumar Ulthur, Director Solaark Renewables Pvt. Ltd, Bangalore inagurated the function and adressed the students regarding the Scope and Challanges in Solar energy and other forms of Renewable energy. He hilghted various Govt. scheems underwhich the public can take part of energy production.Mr. Niranjan Rai, Mr. Avinash Hegde from Mechanical Engineering Department and Mr. Vinodh Kumar Department of EE was present during the function

Mr.Ajith explained briefly on current energy scenario of India. He talked about solar thermal system , solar PV systems advancement. also he focused on challenges in solar energy field. He explained New government policy and schemes to build solar power plant. He stressed on skilled labour non availability in maintenance of solar PV system.

To Create awareness about importance of Gate to mechanical engineering

The workshop is aiming to introduce High school and PUC students to Robo Soccer. The workshop involved building of the bot in the first session and Robo Soccer competition in the second session. Students are introduced to mechanical bot making in the first part of morning session by providing all the components required in the form of a kit. in the second part the controlling of the bot is taught. it involves introduction to DPDT keys and all other electrical parts. In the afternoon session, students underwent a soccer game and competition. Winners are honored.

Social Responsibility Cell is Inaugurated with an objective to facilitate social outreach activity prescribed by V.T.U and to familiarize young minds of School Childrens with Science and Technology. The Chief Guest enlightening the gathering on role of young minds towards social Responsibility.

Orientation Day program for the freshers of 2019-20 of Mechanical Engineering was held on 8th August, 2019, at Canara Engineering College. Students and their parents were briefed by the Student Welfare Officer, Dr. Priya V. Frank on the facilities at CEC and also given guidance on their responsibilities and duties. Dr. N. Venkatesh, Faculty - Mechanical gave a short insight into the VTU guidelines. HOD-Mech, Dr. B. Krishna Prabhu gave a short introduction to the audience into the functioning of the department, subjects and process of learning. An understanding of the Placement process and eligibility was provided by the Placement Officer, Mr. Prashanth Kumar A. Training coordinators briefed the audience on the need and importance of training activities and the impact on placements. The Principal, Dr. Ganesh V. Bhat in his address summed up the vision, working and perception of the institution.

The main objective of this orientation Program is to convey different activities, norms of the Department.

The workshop is aiming to introduce mechanical engineering students to Robo Soccer. The workshop involved building of the bot in the first session and Robo Soccer competition in the second session. Students are introduced to mechanical bot making in the first part of morning session by providing all the components required in the form of a kit. in the second part the controlling of the bot is taught. it involves introduction to DPDT keys and all other electrical parts. In the afternoon session, students underwent a soccer game and competition. Winners are honored.

The main objective of this Orientation program is to convey different activities, norms of the Department.

Mr. Vishnu delivered an expert talk on the current trends and applications of 3D Printing technology. He emphasized the need of 3d printed products and how the industries are employing 3d printed products. He also stressed on the importance of training the graduates on this technology. A lot of avenues and areas were also discussed.

The objective of the workshop is to impart a basic knowledge of Materials and Metallography, where main focus on experimentation of materials. A Six days hands on laboratory session was organized so that participants are exposed to testing of materials. All the experiments related to curriculum and industries were dealt with during the hands on session. The workshop was inaugurated by Dr Ganesh V Bhat, Principal, CEC and Prof. Dr B. K. Prabhu, HOD Dept of Mechanical Engineering, CEC.

DAC meeting was held on 19.6.2019 Dr.S M Kulkarni and Shri Ganesh Kamath were present as external advisory members. Head of Mechanical Dept. and All NBA criteria heads were present in the meeting Agenda of DAC meeting 1. Academic performance in odd semester 2. NBA preparedness and new set of dates 3. Student specific activities 4. Industry Institute interactions 5. Any other matter with the permission of chair All the above matters were discussed. Advisers appreciated the steps taken towards continuous academic improvement and the suggestions from the advisers are noted in order to incorporate towards achieving excellence. HOD thanked all the members and meeting was concluded

Farewell to the final students was organized. Juniors performed cultural activities and gaming events to say best of luck for their future.

It was a Project Exhibition of final year Mechanical Students and nearly 33 projects were displayed. The students of various semesters and from other branches are visited and upgraded their knowledge. Many of the projects are well appreciated by the experts.

Mechanical Premier League-2019 Play for a cause, organized to collect donation which will be donated to needy students of the dept. an amount of 7,800 was collected.

Ms. Savitha, from Creative Solutions gave an expert talk on how to prepare for placements in core industries. Different core industries have different criteria's for recruitment. How to attend an interview, How to face the interviews, what are the present challenges that the core industries are facing, what kind of training the students have to undergo in order to be employable in the industries were some of the key points which were dealt in the talk.

Mechanical 4th-semester students visited Lamina Foundries at Nitte

He was discussed about working nature in core mechanical company, target level,responsibilities etc. He stressed about requirements of basic knowledge to get the job in mechanical core company. He was discussed about importance of project work and involvement in co-curriculum activities.

The following topics have been covered during the workshop, 1) How CATIA works in Engineering Industry. 2) How do industries trust tools on design? 3) List of companies using those technologies for their day to day projects. 4) Kind of opportunities the freshers shall expect by having that proficiency. 5) Opportunities for willing students to work with our engineer on a design.

Mechanical 4th-semester students visited Government Tool Room and Training Center, Mangalore centre at Baikampady.

He was graduated from our college in the year of 2016 in Mechanical Engineering. In this visit specially he was interacted with our SAE Baja team. He has provided useful information regarding construction of vehicle, safety precautions and testing methods before going for the competition. He also provided some needful ideas to solve problems while participating any competitions and problems faced by them when they participated in SAE competition.

Gave some ideas to our current SAE team members

The main objective of the this orientation program is to convey different activities , norms of the department.

Visual Inspection by External Technical Expert

The whole idea of the hands on workshop was to train the faculties on autocad and solidworks platform which could be employed in the regular curriculum to impart knowledge to the students and make them industry ready by bridging the gap between industry and academia. Mr. prathvi briefed about the importance and use of these software's in the industry and how they could be connected to the regular curriculum. The remaining 5 days were completely hands on for all the enrolled faculties right from the basics of CAED and CAMD and concluding with a test for 100 marks. All the basics related to curriculum and industry were dealt with during the hands on session.

Department of mechanical engineering organised one day in-house symposium on 28.11.2018. All the students of mechanical Engg. Participated in this event. Student’s participation was well appreciated.students presented micro project carried during OBE.

He was interacted with final year mechanical students and discussed about job opportunities in petrochemical industries. He was also stressed about importance of undergoing some software courses in academic period and after their graduation.He got this job opportunity based on course of Auto-cad and Catia.

He was graduated in the year of 2016 and present working in Amazon. He had interacted with first year mechanical students. He was discussed about importance of communication skill and presentation skill. He was encouraged our mechanical students by discussing about various job opportunities in IT field and modern digital marketing sector.

International design competition was held in the department of CEC. Students were given the necessary training on the basics of using AUTOCAD software and then a competition was conducted for a duration of 1 hour. 9 students from second year and 3 students from third year were selected for the second round of the competition which would be held in CADD center. The competition is conducted all over the world and students who win all four round will be awarded attractive cash prizes and certificates.

The program organized to welcome third semester students to the branch as tradition. During this CADD institute training certificates were distributed to third semester students who have undergone training during vacation. The rest of the program continued with cultural programs by students.

Gave information in detail about what is SAE to mechanical engineering students.

He was graduated in mechanical engineering in the year of 2009. Now he is working in Denmark based ship as engineer grade III. He explained about basic requirements to get into ship management training and institutions which offer this type of training. He also discussed about criteria of promotion from engineer grade V to engineer grade III,necessity of attending the certified courses.

•The project has been funded by KSCST , successfully evaluated for midterm evaluation and selected for final presentation at Bapuji Institue of Technology ,Davengere The project was guided by Prof. Prashanth Kamath, department of mechanical engineering, Canara engineering college, Benjanapadvu. •The team comprised of Karthik NS,Dhanush,Kiran,Deekishith •scientist from IISc has evaluated the project thoroughly and advised how to carry forward the Product for next level of commerisilaising .

•The project has been funded by KSCST and successfully evaluated for midterm evaluation. The project was guided by Prof. Prashanth Kamath, department of mechanical engineering, Canara engineering college, Benjanapadvu. •The team comprised of Deekshith M G, Dhanush P Nayak, Karthik N S and Kiran N. •The team has been selected for the final phase evaluation to be held at Bapuji Institute of engineering and technology, Davangere.

•About 300 final year projects belonging to different branches across the Karnataka engineering colleges had participated in this event. •Out of which four mechanical projects from our college had attended the event. •Several industrial experts visited our project both and gave new ideas and suggestions for improvement. •During the expo, around nearly 75 to 80 visited our booth including students and adults. •One among the four teams of our college won a consolation prize in the competition.

It was a Project Exhibition of final year Mechanical Students and nearly 34 projects were displayed. The students of various semesters and from other branches are visited and upgraded their knowledge. Many of the projects are well appreciated by the experts.

Intra College Tech Fest. Contraption is a combination of different mechanism to attain certain task. Contraption is a combination of different mechanism to attain certain task *Maximum of 3 members in a team Task 1) burst a balloon filled with air (10 marks) Task 2) blow off the candle (15 marks) Task 3) put a can into a dustbin (10 marks) Task 4) to hit a arrow around three concentric circle (20 -25-30) (20 marks)

Intra-College Technical Fest. Get the Rocket roaring with FLUID to empower it.

Intra- College Technical Fest. *2members in a team *Components will be provided. *No of round will be 3 *Use of materials other then provided will lead to elimination *The game ends if the tower falls while judging *Build the highest tower with a stack of wooden pieces, cups and sticks. *Round 1 is simple whoever’s tower is tall will qualify for second round, time 20mins *Round 2 only 8 participants will be selected Adding extra components whoever’s tower is tall will be declared as winner

Intra- College Tech Fest Building of RC Vehicles and driving them through the track prepared with minimal deviation and damage to the vehicle within the stipulated time.

Exhibition and Competition of Mini Projects and Major Projects for students of all semesters.Evaluation was done by department faculty.

Intra- College Tech Fest Theme was provided to participants at the spot of the event(Save Earth). Students were required to prepare a collage that exhibited the theme. The collages were published on notice board later.

He had interacted with Pre-final year mechanical students and discussed about the importance of doing internship in reputed concerns. He also stressed about need and involvement in final year projects, nature of work in JSW and preparations required to face interviews.

He had interacted with pre-final year mechanical students and explained about his organization and their products. Now he is looking for higher studies in Germany and making preparation for the same.

This workshop is related to hands on experience in automobiles. This includes correlating theory knowledge with practical. In this one day workshop focused on basics of an automobiles and brief information about advanced technology used in automobiles. The practical work is carried out in our energy conversion and DI-section lab. Here students are involved in the work of dismantling and assembling of automobile components. Finally some quiz activities has been conducted.

Department of mechanical engineering organised one day in-house symposium on 09.05.2018. All the students of mechanical Engg. Participated in this event. Student’s participation was well appreciated.

The objective of the workshop is to impart a basic knowledge of green energy technology, where main focus on synthesis of bio diesel from non edible oils and animal fats. A hands on laboratory session was organised so that participants are exposed to biochemistry of bio diesel synthesis

1.TO KNOW DIFFERNT PROCESS INVOVED IN POWER GENERATION LIKE WATER TEREATMENT, COAL HANDLING, COOLING TOWER, ESP, TURBINE HOUSE BY VISIT TO POWER PLANT 2.DIFFERNT TERMINOLGY INVOVED (DEMINERILISATION, EVOPRATION RATE, PCB, PPM ETC ) BY INTERACTION WITH POWER PLANT PERSONNEL 3.TO KNOW DIFFERNT DEARTMENT AND THIER CORDINATION IN POWER PLANT 4.TO INERACTIVE WITH PERSONNEL OF POWER PLANT FOR NON TECHNICAL ISSUES LIKE ISSUES REALTED TO LOCAL COUMMUNITY AND ITS SOLUTION 5. TO CREATE GOOD FOUNDATION FOR CLASS ROOM WORKSHOP

He had interacted with pre-final year mechanical students and discussed about job opportunities in piping field, pre- requisites for this jobs. He discussed about piping course and knowledge of software i.e piping layout,smart plant, PDMS,ASME31.3,ASME 31.1, STRESS and CEASAR . He mentioned about nature of work, method of selection in piping field.

He had interacted with Pre-final year students and discussed about company profile and products manufacturing. He got that job through 'Job fair',hence he explained about selection procedure in off-campus method. He stressed about importance of some engineering subject related to his field.

He was graduated in the year of 2012 in Mechanical Engineering and he got 6th rank in VTU exam. He had discussed about method of learning to get succeed in academic. He discussed about job opportunities for mechanical engineers in software and in Infosys. He also discussed about nature of work in Infosys.

He had discussed about difficulties are faced by him while starting up a new concern. He told about the importance of taking training and internship in any manufacturing concern. He also discussed about importance of CNC in present manufacturing field.

1.Controlling Dc motor through IDE 2. Human Interface 3. Controlling Motor with POT 4.Using Joystick for Interface 5. Remote operation using Android App 6. Incorporating Bluetooth 7. Remotely Controlling using Radio Frequency

1.Controlling Dc motor through IDE 2. Human Interface 3. Controlling Motor with POT 4.Using Joystick for Interface 5. Remote operation using Android App 6. Incorporating Bluetooth 7. Remotely Controlling using Radio Freequency

Our alumni Mr.Amithash Prabhu was graduated from the mechanical engineering in the year of 2012. Since 2012 he was working as a HVAC engineer in Abroad. Today he was interacted with our final year mechanical students and suggested to get basic knowledge about engineering, importance of conducting of experiments in various labs. He was explained about present scenario of job opportunities in Abroad. He told about the importance of NBA and benefits of NBA accredited colleges.

1.Controlling Dc motor through IDE 2. Human Interface 3. Controlling Motor with POT 4.Using Joystick for Interface 5. Remote operation using Android App 6. Incorporating Bluetooth 7. Remotely Controlling using Radio Freequency

Alumni Mr. Anuraag Nair and Mr.Vigneshwar nayak was graduated from mechanical engineering in the year of 2014. Then they were joined Anglo Eastern ship management. They interacted with our pre-final students and explained about selection procedure for the Anglo Eastern. They discussed about working nature in ship and packages offered by the company. They also mention about what are the safety points and first aid procedure to be considered during any emergency. They clearly distinguished about jobs in IT sector and in ships.

He was graduated in mechanical engineering in the year of 2017. He was interacted with our pre-final year mechanical students on 20/3/2018. He addressed about importance and advantages of doing any specialized course after their graduation. He did course in HVAC and he discussed about job opportunities in HVAC. He also discussed about importance of engineering subjects while doing the Course on HVAC.

The objective of the workshop is to impart a basic knowledge of green energy technology, where main focus on synthesis of bio diesel from non edible oils and animal fats. A hands on laboratory session was organised so that participants are exposed to biochemistry of bio diesel synthesis.

This workshop is related to hands on experience in automobiles. This includes correlating theory knowledge with practical. First day of the workshop focused on basics of an automobiles and brief information about advanced technology used in automobiles. Second day of the workshop concentrated on practical work in energy conversion and DI-section lab. Here students were carried work of dismantling and assembling of automobile components. Finally some quiz activities has been conducted.

Communication skills is one of the most important skills that any graduate must posses. This workshop was organized to improve the communication skills of first year students. Some of the important topics dealt in this workshop were basics of communication, Effective listening skills, Effective writing skills, Body language and effective speaking skills. Activities related to the workshop were also conducted and all the students were given an opportunity to participate in the activities.

The objective of the workshop is to impart a basic knowledge of green energy technology, where main focus on synthesis of bio diesel from non edible oils and animal fats. A hands on laboratory session was organised so that participants are exposed to biochemistry of bio diesel synthesis.

Addressed Final year students and explained about the importance of project work which is carried out in final year. He was also explained about the advantages of doing higher studies in Abroad. He discussed the nature of students of India and Ethiopia.

In association with ISIE, Faculty Awareness Program(FAP) workshop on “ Basics of Ardunio " was organized by Department of Mechanical Engineering, on Friday, 24th November 2017 from 9:00 A.M to 4:00 P.M. The workshop was conducted by Dr B Krishna Prabhu, HOD, Professor , Department of Mechanical Engg and students of Mechanical Engineering, for the benefit of faculties. In the two sessions, basics of Ardunio, installation process, Ardunio sketches, verification and upload tools, creation of new project, and execution on Ardunio Uno PCB was demonstrated.

Addressed pre-final year mechanical students and discussed about his work experience in industry,information about higher studies in abroad ,advantages and disadvantage of business,idea about how to start a business.

Addressed pre-final year mechanical students and discussed about job opportunities in foreign countries,his work experience as a quality engineer,importance of practice on engineering labs.

He had discussed about method of training and per-requisite to get the admission in marine engineering,cost incurred to get the training, work nature and packages. Difference in training and placement in two institutions Samundra and Anglo Ship management institute.

a. Learn about various 3D printing technology and material used for prototyping. b. Learning about how FDM based 3D printer works. c. Understand how to assemble the printer, configure it and calibrate it. d. How to design a CAD model, generate the G-code for it and print the model. e. Brief introduction to Arduino microcontroller board and Arduino programing. f. Description of components used in the printer g. Tutorial on software used for controlling, slicing and printing h. Creating a 3D CAD model, generating the G-code using the software

Interacted with final year mechanical students and explained about higher studies in India and abroad,importance of writing the gate and competitive exams,job opportunities for the mechanical students in government sector and IT field and getting training in SAP and its importance.

Interacted with final year mechanical students and explained about job opportunities in an automobile field. As a surveyor he explained about work experience and job opportunities in that field,advantages of independent profession and jobs in public sector,scope for getting the training in Mandovi motors and an automobile field.

Addressed first year and interested mechanical students and explained about the following matter: He shared information about carrier guidance, higher studies in Canada and per-requisite to get the admission in Canada universities, employment opportunities after getting the master's degree in Canada, Evaluation of universities in Canada

Addressed first year and interested mechanical students and explained about the following matter: He shared information about carrier guidance,higher studies in Germany and per-requisite to get the admission in Germany universities, employment opportunities after getting master's degree in Germany, evaluation of universities in Germany

Department of mechanical engineering organised one day in-house symposium on 28.10.2017. All the students of mechanical Engg. Participated in this event. Student’s participation was well appreciated. 25 students are shortlisted for competition.

Addressed final year students and explained about opportunities for the mechanical Graduates in various manufacturing concerns, method of study to get good score. He explained about selection procedure,aptitude test and HR interview faced by him to enter this company, training methods in various divisions of the company.

a. Learn about various 3D printing technology and material used for prototyping. b. Learning about how FDM based 3D printer works. c. Understand how to assemble the printer, configure it and calibrate it. d. How to design a CAD model, generate the G-code for it and print the model. e. Brief introduction to Arduino microcontroller board and Arduino programing. f. Description of components used in the printer g. Tutorial on software used for controlling, slicing and printing h. Creating a 3D CAD model, generating the G-code using the software

Theory session was held on 19th September 2017 by resource persons of our mechanical department.In this session basic information about automobiles is given by resource persons and practical session was followed in our Di-section lab. On 20th September 2017,all students were visited to Mandovi Motors Mangalore. Here one day practical training was provided to the students about recent development in Automobiles.

Addressed final year students and explained about opportunities for the mechanical graduates in the field of pump manufacturing concern. He stressed about importance of writing the GATE exam,explained about duty of project engineer in his concern. Explained about method of study of study and importance of attending interviews.

They interacted with second year mechanical students and discussed about job opportunities in the field of Refrigeration and Air Conditioning.They also explained about importance of some engineering subjects to get the job or to write the competitive exams.

•The project has been funded by KSCST , successfully evaluated for midterm evaluation and selected for final presentation at NMAIT,NITTE. The project was guided by Prof. Prashanth Kamath, department of mechanical engineering, Canara engineering college, Benjanapadvu. •The team comprised of Anirudh, ADITYA NAYAK •scientist from IISc has evaluated the project thoroughly and advised how to carry forward the research work for next level.

Addressed final year mechanical students and explained about opportunities for the mechanical graduates in the field of elevators. He also explained about selection procedure,scope in that area and other job offering concerns in elevator field. He was provided information related to various positions and their packages, working environment etc.

He had discussed about opportunities for the mechanical engineers in CNC. He also discussed manufacturing process of designing, production, quality control and working environment in industry.

He had interacted with our mechanical students and discussed about products developed by the BOSCH and training offered by the company. He stressed about importance of concentration on some engineering subjects,efforts and preparation required to get the job offers in such type of company.